A-A-52414 - Bearing, Roller, Thrust
This CID covers thrust roller bearings consisting of two flat thrust plates, cylindrical rollers, and a retainer (see figure 1). They are used where the shaft axis is parallel to the load.
A-A-52491 - Bearing, Ball, Thrust: Inch And Metric Sizes, Grooved Race Surface Rigid Or Flat Seat Type
This CID covers the requirements for a thrust ball bearing, referred to herein as ┬┐bearing┬┐. It consists of two hardened and ground washers (thrust plates) that enclose a complement of precision ground and lapped balls and separated by a cage or retainer. The bearing is used to provide axial rigidity and not recommended if radial loading is expected.
A-A-55598 - Bearings, Roller, Cylindrical, Single Row Of Rollers, Two Roller Retaining Ribs On Inner Ring, One Roller Retaining Rib On Outer Ring, One Direction Locating
This commercial item description (CID) covers the requirements for cylindrical roller bearings, single row of rollers, two roller retaining ribs on inner ring, one roller retaining rib on outer ring, one direction locating.
A-A-55599 - Bearings, Roller, Cylindrical, Single Row Of Rollers, One Roller Retaining Rib On Inner Ring, Two Roller Retaining Ribs On Outer Ring, One Direction Locating
This Commercial Item Description (CID) covers the requirements for cylindrical roller bearings, single row of rollers, one roller retaining rib on inner ring, two roller retaining ribs on outer ring, one direction locating.
A-A-55600 - Bearings, Roller, Cylindrical, Single Row Of Rollers, Two Roller Retaining Ribs On Inner Ring, Two Roller Retaining Ribs On Outer Ring, Two Direction Locating
This commercial item description (CID) covers the requirements for cylindrical roller bearings, single row of rollers, two roller retaining ribs on inner ring, two roller retaining ribs on outer ring, two direction locating.
A-A-55601 - Bearings, Roller, Cylindrical, Single Row Of Rollers, Cylindrical Inner Ring, Two Roller Retaining Ribs On Outer Ring, Non-Locating
This commercial item description (CID) covers the requirements for cylindrical roller bearings, single row of rollers, cylindrical inner ring, two roller retaining ribs on outer ring, non-locating.
A-A-55602 - Bearings, Roller, Cylindrical, Single Row Of Rollers, Two Roller Retaining Ribs On Inner Ring, Cylindrical Outer Ring, Non-Locating
This commercial item description (CID) covers the requirements for cylindrical roller bearings, single row of rollers, two roller retaining ribs on inner ring, cylindrical outer ring, non-locating.
ABMA12.1 - Instrument Ball Bearings, Metric Design
This standard covers the characteristics that define metric design instrument ball bearings, their boundary dimensions, tolerances, internal clearances, classification for selective assembly, and recommended practices for gaging, friction torque determination, load rating, operational life prediction and yield rate limitation.
ABMA12.2 - Instrument Ball Bearings Inch Design
This standard covers the characteristics that define inch design instrument ball bearings, their boundary dimensions, tolerances, internal clearances, classification for selective assembly, and recommended practices for gaging, friction torque determination, load rating, operational life prediction and yield rate limitation.
ABMA16.1 - Airframe Ball, Roller And Needle Roller Bearings, Metric Design
This Standard specifies characteristics, boundary dimensions, tolerances and radial internal clearances of rolling bearings, other than tapered roller bearings, used in airframes.
ABMA16.2 - Airframe Ball, Roller And Needle Roller Bearings, Inch Design
This Standard specifies characteristics, boundary dimensions, tolerances and radial internal clearances of rolling bearings, other than tapered roller bearings, used in airframes.
ABMA18.1 - Needle Roller Bearings Radial, Metric Design
This standard for Metric Design Industrial Radial Needle Roller Bearings and components includes: identification Code, Boundary Dimensions, Bearing Tolerances, Fitting and Mounting Practice.
ABMA18.2 - Bearings, Needle Roller Radial, Inch Design
This standard for Inch Design Industrial Radial Needle Roller Bearings and components includes: Identification Code, Boundary Dimensions Bearing Tolerances, Fitting and Mounting Practice.
ABMA19.1 - Bearings, Roller, Tapered Radial Metric Design
This standard covers metric design radial tapered roller bearings of various types, part numbering systems, boundary dimensions, tolerances, and fitting practices.
ABMA19.2 - Bearings, Roller, Tapered - Radial Inch Design
This standard covers inch design radial tapered roller bearings of various types, part numbering systems, tolerances, and fitting practices.
ABMA20 - Bearings Of Ball, Radial, Cylindrical Roller And Spherical Roller Types, Metric Design
This standard includes: basic plan for the boundary dimensions of metric radial ball and roller bearings. General rules for extension of the basic plans. Dimensions and tolerances for snap ring groove and locating snap rings. Tolerances for boundary dimensions, chamfers, various runouts and internal clearance. Identification code.
ABMA22.1 - Bearings, Spherical Plain Radial Joint Type, Metric Design (See Notice Of Withdrawal For Replacement Information)
This standard for spherical bearings, joint type (without rolling elements) has been established for the purpose of defining the characteristics of these bearings such as boundary dimensions, tolerances and terminology.
ABMA22.2 - Bearings, Spherical Plain Radial Joint Type, Inch Design
This standard for spherical bearings, joint type (without rolling elements) has been established for the purpose of defining the characteristics of these bearings such as boundary dimensions, tolerances and terminology.
ABMA23.2 - Bearings, Thrust, Of Tapered Roller Type - Inch Design
This standard for thrust bearings of the tapered roller type of inch design covers: Bearing Number and Type Identity, Symbols and Nomenclature, Boundary Dimensions, Tolerances, Mounting Dimensions.
ABMA24.1 - Bearings Of Ball, Thrust, Cylindrical Roller And Spherical Roller Types - Metric Design
This standard for thrust bearings of ball, cylindrical roller and spherical roller types of metric design covers: Identification Code, Symbols and Nomenclature, Boundary Dimensions, Tolerances, Mounting Dimensions.
ABMA24.2 - Bearings Of Ball, Thrust And Cylindrical Roller Types - Inch Design
This standard for inch design thrust bearings of ball and cylindrical roller types covers: Identification Code, Symbols and Nomenclature, Boundary Dimensions, Tolerance, Mounting Dimensions.
ABMA25.2 - Bearings, Rolling, Linear Motion Recirculating Ball, Sleeve Type Inch Series
This Standard gives the general plan for boundary dimensions, tolerances and terminology for recirculating ball, sleeve type, linear motion bearings.
ABMA26.2 - Ball Bearings, Thin Section, Inch Design
This standard specifies the boundary dimensions and the tolerances for boundary dimensions, running accuracies and internal clearances for thin section ball bearings of single row radial contact, angular contact and four-point angular contact types.
AN200 - Bearing, Ball, Heavy Duty, Anti-Friction, Airframe (Use Ms20200 For Kp Series, Ms27261 For Ks Series)
AN201 - Bearing, Ball, Intermediate Duty, Anti&Friction, Airframe
AN202 - Bearing, Ball, Extra Light Duty, Anti&Friction, Airframe (S/S By Ms&20202)
AN203 - Bearing-Intermediate Duty Ball (Deep Groove, Composition Seal) (Use Ms 20201)
AN204 - Bearing-Heavy Duty Ball (Deep Groove, Felt Seal) (See Ms 20200)
AN205 - Bearing-Heavy Duty Double Row Ball (Deep Grove, Composition Seal) (See Ms 20207)
AN206 - Bearing, Ball, Double Row, Self-Aligning, Heavy Duty (S/S By Ms20206)
AN207 - Bearing, Ball, Double Row, Heavy Duty, Anti-Friction, Airframe (S/S By Ms20207)
AN208 - Bearing, Heavy Duty Double Row Ball (Felt Seal) (Use Ms 27644)
AN209 - Bearing-Intermediate Duty Ball (Deep Groove, Felt Seal) (See Ms 20201)
AN210 - Pulley & Anti&Friction Bearing Control (Use An219, An220 And An221)
AN212 - Bearing - Heavy Duty Ball (Deep Groove, Composition Seal)
AN213 - Bearing-Extra Heavy Duty Ball (Deep Groove, Composition Seal) (Dee Ms 20207)
AN215 - Bearing&Bellcrank
AN216 - Ball, Metal
AN218 - Bearing - Ball, Bellcrank, Anti-Friction, Airframe (Use Ms20218)
AN7503 - Washer-Wheel Bearing Retaining-Use Ms21258
AN946 - Bearing, Ball, Rod End, External Thd, Self-Aligning, Anti-Friction, Airframe (Use Ms-21151)
AN948 - Bearing, Ball, Rod End, Hollow Shank, Self-Aligning, Anti-Friction, Airframe (Use Ms-21152)
AN949 - Bearing, Rod End, Hollow Shank, Self Aligning, Plain, Airframe
AN950 - (
Images) Washer - Ball Socket
AN951 - Bearing, Ball, Rod End, Internal Thread, Self-Aligning, Anti-Friction, Airframe (Ms-21153)
AN955 - Washer&Ball Set
DOD-B-82737 - Balls, Bearing, Ferrous And Non-Ferrous (For Use In Bearings, Valves And Bearing Applications, General Specification For
This specification covers requirements for ferrous and non-ferrous inch balls.
DOD-B-82737/1 - Balls, Bearing, Aircraft Quality Steel, Metric
DOD-B-82737/2 - Balls, Bearing, Steel, Chrome Alloy, Metric
DOD-B-82737/3 - Balls, Bearing, Corrosion Resistant Steel, Metric
DOD-B-82737/4 - Balls, Bearing, Steel, Carbon, Metric
DOD-B-82737/5 - Balls, Bearing, Bronze, Metric
DOD-B-82737/6 - Balls, Bearing, Nickel-Copper Alloy (K-Monel), Metric
DS3225 - ( Images) Bearing, Roller, Tapered, Single Row Of Rollers (Metric Series) (S/S By Astm-F2591)
FF-B-171/1 - Bearing, Ball, Annular, Single Row, Radial, Non-Filling Slot, Ansi/Afbma Dimension Series 10, 02, 03 Under 10 Mm Bore, Metric (S/S By A-A-59581)
FF-B-171/10 - Bearing, Ball, Annular, Single Row, Radial, Non-Filling Slot, Cartridge Type Without Grease Plug, Ansi/Afbma Dimension Series 33 (S/S By A-A-59596)
FF-B-171/11 - Bearing, Ball, Annular, Double Row, Radial, Internal Self-Aligning, Ansi/Afbma Dimension Series 02 (S/S By A-A-59597)
FF-B-171/12 - Bearing, Ball, Annular, Double Row, Radial, Internal Self-Aligning, Ansi/Afbma Dimension Series 03 (S/S By A-A-59598)
FF-B-171/13 - Bearing, Ball, Annular, Double Row, Radial, Internal Self-Aligning, Ansi/Afbma Dimension Series 22 (S/S By A-A-59599)
FF-B-171/14 - Bearing, Ball, Annular, Double Row, Radial, Internal Self-Aligning, Ansi/Afbma Dimension Series 23 (S/S By A-A-59600)
FF-B-171/15 - Bearing, Ball, Annular, Single Row, Primarily Radial, Counterbored Outer Ring, Contact Angle Up To And Including 10 Deg., Non-Separable, Ansi/Afbma Dimension Series 19
FF-B-171/16 - Bearing, Ball, Annular, Single Row, Primarily Radial, Counterbored Outer Ring, Contact Angle Up To And Including 10 Deg., Non-Separable, Ansi/Afbma Dimension Series 10
FF-B-171/17 - Bearing, Ball, Annular, Single Row, Primarily Radial, Counterbored Outer Ring, Contact Angle Up To And Including 10 Deg., Non-Separable, Ansi/Afbma Dimension Series 02
FF-B-171/18 - Bearing, Ball, Annular, Single Row, Primarily Radial, Counterbored Outer Ring, Contact Angle Up To And Including 10 Deg., Non-Separable, Ansi/Afbma Dimension Series 03
FF-B-171/19 - Bearing, Ball, Annular, Single Row, Angular Contact, Counterbored Outer Ring, Contact Angle Above 10 Deg., Up To And Including 22 Deg., Non-Separable, Ansi/Afbma Dimension Series 19 (S/S By A-A-59623)
FF-B-171/2 - Bearing, Ball, Annular, Single Row, Radial, Non-Filling Slot, Ansi/Afbma Dimension Series 19 (S/S By A-A-59582)
FF-B-171/20 - Bearing, Ball, Annular, Single Row, Angular Contact, Counterbored Outer Ring, Contact Angle Above 10 Deg. Up To And Including 22 Deg., Non-Separable, Ansi/Afbma Dimension Series 10 (S/S By A-A-59624)
FF-B-171/21 - Bearing, Ball, Annular, Single Row, Angular Contact, Counterbored Outer Ring, Contact Angle Above 10 Deg. Up To And Including 22 Deg., Non-Separable, Ansi/Afbma Dimension Series 02 (S/S By A-A-59625)
FF-B-171/22 - Bearing, Ball, Annular, Single Row, Angular Contact, Counterbored Outer Ring, Contact Angle Above 10 Deg. Up To And Including 22 Deg., Non-Separable, Ansi/Afbma Dimension Series 03 (S/S By A-A-59626)
FF-B-171/23 - Bearing, Ball, Annular, Single Row, Angular Contact, Counterbored Outer Ring, Contact Angle Above 10 Deg. Up To And Including 22 Deg., Non-Separable, Ansi/Afbma Dimension Series 04 (S/S By A-A-59627)
FF-B-171/24 - Bearing, Ball, Annular, Single Row, Angular Contact, Counterbored Outer Ring, Contact Angle Above 22 Deg. Up To And Including 32 Deg., Non-Separable, Ansi/Afbma Dimension Series 10 (S/S By A-A-59628)
FF-B-171/25 - Bearing, Ball, Annular, Single Row, Angular Contact, Counterbored Outer Ring, Contact Angle Above 22 Deg. Up To And Including 32 Deg., Non-Separable, Ansi/Afbma Dimension Series 02 (S/S By A-A-59629)
FF-B-171/26 - Bearing, Ball, Annular: Single Row, Angular Contact, Counterbored Outer Ring, Contact Angle Above 22 Deg. Up To And Including 32 Deg., Non-Separable, Ansi/Afbma Dimension Series 03 (S/S By A-A-59630)
FF-B-171/27 - Bearing, Ball, Annular, Single Row, Angular Contact, Counterbored Outer Ring, Contact Angle Above 22 Deg. Up To And Including 32 Deg., Non-Separable, Ansi/Afbma Dimension Series 04 (S/S By A-A-59631)
FF-B-171/28 - Bearing, Ball, Annular, Single Row, Angular Contact, Counterbored Outer Ring, Contact Angle Above 32 Deg. Up To And Including 45 Deg., Non-Separable, Ansi/Afbma Dimension Series 10 (S/S By A-A-59632)
FF-B-171/29 - Bearing, Ball, Annular, Single Row, Angular Contact, Counterbored Outer Ring, Contact Angle Above 32 Deg. Up To And Including 45 Deg., Non-Separable, Ansi/Afbma Dimension Series 02 (S/S By A-A-59633)
FF-B-171/3 - Bearing, Ball, Annular, Single Row, Radial, Non-Filling Slot, Ansi/Afbma Dimension Series 10 (S/S By A-A-59583)
FF-B-171/30 - Bearing, Ball, Annular, Single Row, Angular Contact, Counterbored Outer Ring, Contact Angle Above 32 Deg. Up To And Including 45 Deg., Non-Separable, Ansi/Afbma Dimension Series 03 (S/S By A-A-59634)
FF-B-171/31 - Bearing, Ball, Annular, Double Row, Angular Contact, Counterbored Outer Ring, Contact Angle Above 32 Deg. Up To And Including 45 Deg., Non-Separable, Ansi/Afbma Dimension Series 04 (S/S By A-A-59635)
FF-B-171/32 - Bearing, Ball, Annular, Double Row, Angular Contact, Non-Filling Slot, Vertex Of Contact Angles Outside Bearing, Ansi/Afbma Dimension Series 32 (S/S By A-A-59636)
FF-B-171/33 - Bearing, Ball, Annular, Double Row, Angular Contact, Non-Filling Slot, Vertex Of Contact Angles Outside Bearing, Ansi/Afbma Dimension Series 33 (S/S By A-A-59637)
FF-B-171/34 - Bearing, Ball, Annular, Double Row, Angular Contact, Non-Filling Slot, Vertex Of Contact Angles Inside Bearing, Ansi/Afbma Dimension Series 32 (S/S By A-A-59638)
FF-B-171/35 - Bearing, Ball, Annular, Double Row, Angular Contact, Filling Slot, Vertex Of Contact Angles Inside Bearing, Ansi/Afbma Dimension Series 33 (S/S By A-A-59639)
FF-B-171/36 - Bearing, Ball, Annular, Double Row, Angular Contact, Filling Slot, Vertex Of Contact Angles Outside Bearing, Ansi/Afbma Dimension Series 32 (S/S By A-A-59640)
FF-B-171/37 - Bearing, Ball, Annular, Double Row, Angular Contact, Filling Slot, Vertex Of Contact Angles Outside Bearing, Ansi/Afbma Dimension Series 33 (S/S By A-A-59641)
FF-B-171/4 - Bearing, Ball, Annular, Single Row, Radial, Non-Filling Slot, Ansi/Afbma Dimension Series 02 (S/S By A-A-59584)
FF-B-171/5 - Bearing, Ball, Annular, Single Row, Radial, Non-Filling Slot, Ansi/Afbma Dimension Series 03 (S/S By A-A-59585)
FF-B-171/6 - Bearing, Ball, Annular, Single Row, Radial, Non-Filling Slot, Ansi/Afbma Dimension Series 04 (S/S By A-A-59586)
FF-B-171/7 - Bearing, Ball, Annular, Single Row, Radial, Filling Slot, Ansi/Afbma Dimension Series 02 (S/S By A-A-59587)
FF-B-171/8 - Bearing, Ball, Annular, Single Row, Radial, Filling Slot, Ansi/Afbma Dimension Series 03 (S/S By A-A-59589)
FF-B-171/9 - Bearing, Ball, Annular, Single Row, Radial Non-Filling Slot, Cartridge Type Without Grease Plug, Ansi/Afbma Dimension Series 32 (S/S By A-A-59595)
FF-B-171 - Bearings, Ball, Annular (General Purpose), Metric
This specification covers annular ball bearings for general purpose use that conform to boundary dimensions and Annular Bearing Engineering Committee (ABEC) ABEC-1 and ABEC-5 tolerances as defined in American National Standard Institute (ANSI) Anti-Friction Bearing Manufacturers Association (AFBMA) STD 20.
FF-B-185 - ( Images) Bearings, Roller, Cylindrical; And Bearings, Roller, Self-Aligning (S/S By A-A-55598, A-A-55599, A-A-55600, A-A-55601 And A-A-55602)
This specification covers cylindrical and self-aligning roller bearings for general purpose use.
FF-B-187/1 - Bearing, Roller, Tapered, Single Row, Normal Angle (Type Ts) (S/S By A-A-59649)
FF-B-187/10 - Bearing, Roller, Tapered, Double Row, Straight Bore, Two Single Cones With Contacting Front Faces Slotted And Chamfered For Lubrication, One Double Cup With Lubrication Holes And Grove (Type Tnasw) (S/S By A-A-59658)
FF-B-187/11 - Bearing, Roller, Tapered, Double Row, Straight Bore, Two Single Cones, Cone Back Face Rib Ground On The Outer Diameter For Sealing Purposes, One Double Cup With Lubrication Holes And Groove (Type Tnaswe) (S/S By A-A-59659)
FF-B-187/2 - Bearing, Roller, Tapered, Single Row, Normal Angle, Flanged Cup (Type Tsf) (S/S By A-A-59650)
FF-B-187/3 - Bearing, Roller, Tapered, Single Row, Steep Angle (Type Tss) (S/S By A-A-59651)
FF-B-187/4 - Bearing, Roller, Tapered, Single Row, Steep Angle, Flanged Cup (Type Tssf) (S/S By A-A-59652)
FF-B-187/5 - Bearing, Roller, Tapered, Double Row, One Double Cone, Two Single Cups, (Types Tdi And Tdis) (S/S By A-A-59653)
FF-B-187/6 - Bearing, Roller, Tapered, Double Row, Normal Angle, Two Single Cones, One Double Cup, (Type Tdo) (S/S By A-A-59654)
FF-B-187/7 - Bearing, Roller, Tapered, Double Row, Steep Angle, Two Single Cones, One Double Cup (Type Tdos) (S/S By A-A-59655)
FF-B-187/8 - Bearing, Roller, Tapered, Double Row, Normal Angle, Two Single Cones, One Double Cup, Nonadjustable (Type Tna) (S/S By A-A-59656)
FF-B-187/9 - Bearing, Roller, Tapered, Double Row, Steep Angle, Two Single Cones, One Double Cup, Nonadjustable (Type Tnas) (S/S By A-A-59657)
FF-B-187 - Bearing, Roller, Tapered
This specification covers tapered roller bearings for general purpose use that conform to boundary dimensions and tolerances as defined in American National Standards Institute (ANSI)/Anti-Friction Bearing Manufacturers Association (AFBMA) STD 19.
FF-B-2844 - Bearings, Ball, Annular (General Purpose)
This specification covers annular ball bearings for general purpose use that conform to boundary dimensions and Annular Bearing Engineering Committee (ABEC) ABEC-1, ABEC-3, and ABEC-5 tolerances as defined in the Amercian National Standards Institute (ANSI) Anti-Friction Bearing Manufacturers Association (AFBMA) STD 20.
FF-B-2844/1 - Bearing, Ball, Annular: Single Row, Radial, Non-Filling Slot, Miniature Size, Instrument Type (Chromium Alloy Steel) (S/S By A-A-59643)
FF-B-2844/2 - Bearing, Ball, Annular: Single Row, Radial, Non-Filling Slot, Extra Light Series (R - Series) (Chromium Alloy Steel) (S/S By A-A-59644)
FF-B-2844/3 - Bearing, Ball, Annular: Single Row, Radial, Non-Filling Slot, Extra Light Series (R - Series) (Larger Than 0.7500 Bore) (Chromium Alloy Steel) (S/S By A-A-59645)
FF-B-2844/4 - Bearing, Ball, Annular: Single Row, Radial, Non-Filling Slot, Miniature Size, Instrument Type (Corrosion Resistant Steel) (S/S By A-A-59643)
FF-B-2844/5 - Bearing, Ball, Annular: Single Row, Radial, Non-Filling Slot, Extra Light Series (R - Series) (0.7500 Bore And Under) (Corrosion Resistant Steel) (S/S By A-A-59644)
FF-B-2844/6 - Bearing, Ball, Annular: Single Row, Radial, Non-Filling Slot, Extra Light Series (Xls - Series) (Chromium Alloy Steel) (S/S By A-A-59646)
FF-B-2844/7 - Bearing, Ball, Annular: Single Row, Radial, Non-Filling Slot, Light Series (Ls - Series) (Chromium Alloy Steel) (S/S By A-A-59647)
FF-B-2844/8 - Bearing, Ball, Annular: Single Row, Radial, Non-Filling Slot, Medium Series (Ms - Series) (Chromium Alloy Steel) (S/S By A-A-59648)
MIL-B-0022227 - Bearing, Ball, Annular, Generator And Motor Generator
This specification establishes the requirements for antifriction ball bearings primarily intended for use in aircraft electrical generators and motor-generators.
MIL-B-1083 - Balls, Bearing, Ferrous And Non-Ferrous (For Use In Bearings, Valves And Bearing Applications) General Specification For (See Notice 3 For Replacement Information)
This specification covers requirements for ferrous and non-ferrous inch balls.
MIL-B-16129 - Bearing, Ball, Annular, Open Type (For Torpedo Gyroscopes)
This specification covers a high precision, open (or magneto), alloy steel ball bearing for use in torpedo gyroscopes.
MIL-B-16647 - Bearings, Ball, Annular (Heat-Resistant, For Torpedo Use)
MIL-B-17380 - Bearing, Roller, Thrust (S/S By A-A-52414)
This specification covers thrust bearings containing cylindrical rollers for use where loads are parallel to the shaft axis.
MIL-B-17931 - Bearing, Ball, Annular, For Quiet Operation
This specification covers annular ball bearings, with industry bore codes 00 through 22, and 32 for use in quiet operating (low vibration) machinery.
MIL-B-18367 - Bearings, Roller, Cylindrical, Radial And Thrust, Special Precision
MIL-B-21484 - Bearings, Antifriction, Transparent Plastic Skin, Packaging Of (S/S By Mil-B-197)
MIL-B-22227 - Bearing, Ball, Annular, Generator And Motor-Generator (S/S By Sae-As22227)
This specification establishes the requirements for antifriction ball bearings primarily intended for use in aircraft electrical generators and motor-generators.
MIL-B-22446 - Bearing, Annular Ball, High Grade
This specification describes the requirements for the procurement of precisioon annular ball bearings that are presently not included in Specification FF-B-171.
MIL-B-22616 - Bearing, Ball, Antifriction
MIL-B-23063 - Bearing, Ball Annular, Instrument Precision (S/S By Mil-B-81793)
MIL-B-3168 - Balls, Bearing, Non-Ferrous (For Use In Bearings And Valves) (Use Mil-B-1083)
MIL-B-38506 - Bearing, Roller, Cylindrical Mx-2847( )/Fps-35
MIL-B-3990 - Bearings, Roller, Needle, Airframe, Antifriction, Inch (S/S By Sae-As39901)
This specification covers the requirements for non-separable, antifriction needle bearings.
MIL-B-58105 - Bearing Restoring By Raceway Grinding
This specification covers requirements for restoration of rolling element bearings.
MIL-B-6038 - Bearing, Ball, Bellcrank, Anti-Friction, Airframe (S/S By Sae-As6038)
This specification covers antifriction bellcrank ball bearings intended primarily for airframe use.
MIL-B-6039 - Bearings, Ball, Rod End, Double Row, Self-Aligning (S/S By Sae-As6039)
This specification covers sealed, self-aligning, anti-friction, rod end ball bearings with application in temperature ranges (1) -65 deg. F. to 250 deg. F. and (2) -65 deg. F. to 300 deg. F. with 20 percent reduction of dynamic load carrying capacity.
MIL-B-81793/1 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Deep Groove, Unflanged, Chromium-Alloy Steel, Abec 5P
MIL-B-81793/10 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Deep Groove, Unflanged, Inner Ring Extended, Chromium-Alloy Steel, Abec 7P
MIL-B-81793/11 - Bearing,Ball, Annular, For Instruments And Precision Rotating Components, Deep Groove, Unflanged, Inner Ring Extended, Corrosion Resistant Steel, Abec 5P
MIL-B-81793/12 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Deep Groove, Unflanged, Inner Ring Extended, Corrosion Resistant Steel, Abec 7P
MIL-B-81793/13 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Deep Groove, Flanged, Inner Ring Extended, Chromium-Alloy Steel, Abec 5P
MIL-B-81793/14 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Deep Groove, Flanged, Inner Ring Extended, Chromium-Alloy Steel, Abec 7P
MIL-B-81793/15 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Deep Groove, Flanged, Inner Ring Extended, Corrosion Resistant Steel, Abec 5P
MIL-B-81793/16 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Deep Groove, Flanged, Inner Ring Extended, Corrosion Resistant Steel, Abec 7P
MIL-B-81793/17 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Angular Contact, Unflanged, Non-Separable And Counterbored Outer Ring Chromium-Alloy Steel, Abec 5P
MIL-B-81793/18 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Angular Contact, Unflanged, Non-Separable And Counterbored Outer Ring Chromium-Alloy Steel, Abec 7P
MIL-B-81793/19 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Angular Contact, Unflanged, Non-Separable And Counterbored Outer Ring Corrosion Resistant Steel, Abec 5P
MIL-B-81793/2 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Deep Groove, Unflanged, Chromium-Alloy Steel, Abec 7P
MIL-B-81793/20 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Angular Contact, Unflanged, Non-Separable And Counterbored Outer Ring, Corrosion Resistant Steel, Abec 7P
MIL-B-81793/21 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Angular Contact, Flanged, Non-Separable And Counterbored Outer Ring On Flange Side, Chromium-Alloy Steel, Abec 5P
MIL-B-81793/22 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Angular Contact, Flanged, Non-Separable And Counterbored Outer Ring On Flange Side, Chromium-Alloy Steel, Abec 7P
MIL-B-81793/23 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Angular Contact, Flanged, Non-Separable And Counterbored Outer Ring On Flange Side, Corrosion Resistant Steel, Abec 5P
MIL-B-81793/24 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Angular Contact, Flanged, Non-Separable And Counterbored Outer Ring On Flange Side, Corrosion Resistant Steel, Abec 7P
MIL-B-81793/25 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Angular Contact, Unflanged, Separable And Stepped Inner Ring. Chromium-Alloy Steel, Abec 5P
MIL-B-81793/26 - Bearing,Ball, Annular, For Instruments And Precision Rotating Components, Angular Contact, Unflanged, Separable And Stepped Inner Ring, Chromium-Alloy Steel, Abec 7P
MIL-B-81793/27 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Angular Contact, Unflanged, Separable And Stepped Inner Ring, Corrosion Resistant Steel, Abec 5P
MIL-B-81793/28 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Angular Contact, Unflanged, Separable And Stepped Inner Ring, Corrosion Resistant Steel, Abec 7P
MIL-B-81793/29 - Bearing Ball, Annular, For Instruments And Precision Rotating Components, Angular Contact, Flanged, Separable And Stepped Inner Ring, Chromium-Alloy Steel, Abec 5P
MIL-B-81793/3 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Deep Groove, Unflanged, Corrosion Resistant Steel, Abec 5P
MIL-B-81793/30 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Angular Contact, Flanged,Separable And Stepped Inner Ring, Chromium-Alloy Steel, Abec 7P
MIL-B-81793/31 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Angular Contact, Flanged, Separable And Stepped Inner Ring, Corrosion Resistant Steel, Abec
MIL-B-81793/32 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Angular Contact, Flanged, Separable And Stepped Inner Ring, Corrosion Resistant Steel, Abec 7P
MIL-B-81793/33 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Angular Contact, Unflanged, Non-Separable And Stepped Inner Ring, Chromium-Alloy Steel, Abec 5P
MIL-B-81793/34 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Angular Contact, Unflanged, Non-Separable And Stepped Inner Ring, Chromium-Alloy Steel, Abec 7P
MIL-B-81793/35 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Angular Contact, Unflanged, Non-Separable And Stepped Inner Ring, Corrosion Resistant Steel, Abec 5P
MIL-B-81793/36 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components. Angular Contact, Unflanged, Non-Separable And Stepped Inner Ring, Corrosion Resistant Steel, Abec 7P
MIL-B-81793/4 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Deep Groove, Unflanged, Corrosion Resistant Steel, Abec 7P
MIL-B-81793/5 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Deep Groove, Flanged, Chromium-Alloy Steel, Abec 5P
MIL-B-81793/6 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Deep Groove, Flanged, Chromium-Alloy, Abec 7P
MIL-B-81793/7 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Deep Groove, Flanged, Corrosion Resistant Steel, Abec 5P
MIL-B-81793/8 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Deep Groove, Flanged, Corrosion Resistant Steel, Abec 7P
MIL-B-81793/9 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Deep Groove, Unflanged, Inner Ring Extended, Chromium-Alloy Steel, Abec 5P
MIL-B-81793 - Bearings, Ball, Annular, For Instruments And Precision Rotating Components
This specification covers annular ball bearings intended primarily for use in instruments and precision rotating components.
MIL-B-83175 - Bearing, Ball, Annular, Antifriction, Accessory, High Speed Turbine, Aircraft
This specification covers high speed ball bearings intended primarily for use in aircraft accessory turbines.
MIL-B-83292 - Bearing, Ball, Annular, Instrument, For Precision Rotating Components (S/S By Mil-B-81793)
MIL-B-85107 - Bearing, Spin (Sidewinder)
This specification establishes the requirements for manufacture and acceptance of the spin bearing critical item, referred to herein as the "spin bearing".
MIL-B-85684 - Bearing, Spin (Sidewinder)
This specification establishes the requirements for manufacture and acceptance of the spin bearing, a critical item, referred to herein as the "spin bearing" and is part of the guidance and control section, WGU-4A/B (AIM-9M).
MIL-B-8859 - Bearing, Ball, Annular, Antifriction, Engine Accessories, Aircraft
MIL-B-8914 - Bearing, Roller, Self-Aligning, Airframe, Antifriction (S/S By Sae-As8914)
This specification covers the requirements for nonseparable antifriction roller bearings.
MIL-B-8952 - Bearing, Roller, Rod End, Antifriction Self-Aligning (S/S By Sae-As8952)
This specification covers antifriction self-aligning rod end roller bearings operating in the temperature range minus 67 deg. F to plus 300 deg. F and intermittent spikes to 350 deg. F (177 deg. C).
MIL-B-913 - Bearings, Ball, Annular, For Instruments And Precision Rotating Components (Metric), General Specification For
This specification covers annular ball bearings intended primarily for use in instruments and precision rotating components.
MIL-B-913/1 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Deep Groove, Unflanged, Chromium-Alloy Steel, Abec 5P (Metric)
MIL-B-913/10 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Angular Contact, Unflanged, Non-Separable And Counterbored Outer Ring, Chromium-Alloy Steel, Abec 7P (Metric)
MIL-B-913/11 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Angular Contact, Unflanged, Non-Separable And Counterbored Outer Ring, Chromium-Alloy Steel, Abec 5P (Metric)
MIL-B-913/12 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Angular Contact, Unflanged, Non-Separable And Counterbored Outer Ring, Corrosion Resistant Steel, Abec 5P (Metric)
MIL-B-913/13 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Angular Contact, Unflanged, Separable And Stepped Inner Ring, Chromium-Alloy Steel, Abec 5P (Metric)
MIL-B-913/14 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Angular Contact, Unflanged, Separable And Stepped Inner Ring, Chromium-Alloy Steel, Abec 7P (Metric)
MIL-B-913/15 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Angular Contact, Unflanged, Separable And Stepped Inner Ring, Corrosion Resistant Steel, Abec 5P (Metric)
MIL-B-913/16 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Angular Contact, Unflanged, Separable And Stepped Inner Ring, Corrosion Resistant Steel, Abec 5P (Metric)
MIL-B-913/2 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Deep Groove, Unflanged, Chromium-Alloy Steel, Abec 7P (Metric)
MIL-B-913/3 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Deep Groove, Unflanged, Corrosion Resistant Steel, Abec 5P (Metric)
MIL-B-913/4 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Deep Groove, Unflanged, Corrosion Resistant Steel, Abec 7P (Metric)
MIL-B-913/5 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Deep Groove, Flanged, Chromium-Alloy Steel, Abec 5P (Metric)
MIL-B-913/6 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Deep Groove, Flanged, Chromium-Alloy Steel, Abec 7P (Metric)
MIL-B-913/7 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Deep Groove, Flanged, Corrosion Resistant Steel, Abec 5P (Metric)
MIL-B-913/8 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Deep Groove, Flanged, Corrosion Resistant Steel, Abec 7P (Metric)
MIL-B-913/9 - Bearing, Ball, Annular, For Instruments And Precision Rotating Components, Angular Contact, Unflanged, Non-Separable And Counterbored Outer Ring, Chromium-Alloy Steel, Abec 5P (Metric)
MIL-HDBK-203 - Manufacturers' Symbols And Designations For Anti-Friction Bearings
This handbook is intented as a guide for the interpretation of anti-friction bearing manufacturers symbols and designation. It is intended for personnel concerned with the preparation of specifications, procurement of bearings and identification of bearings.
MIL-R-22440 - Rollers, Bearing, Needle, Ferrous, Solid (S/S By Astm-F2511)
This specification covers the procurement requirements for solid ferrous needle bearing rollers.
MIL-STD-102 - Anti-Friction Bearing Identification Code
This standard covers a common code for identification of anti-friction bearings.
MIL-STD-1334 - Process For Barrier Coating Of Anti-Friction Bearings
This standard specifies the basic requirements for the application of barrier coatings to anti-friction bearings for the purpose of preventing lubricant loss by surface migration and spreading during storage and in service.
MIL-STD-1647 - Identification Markings For Domestically Manufactured Bearings, Ball, Annular For Instruments And Precision Components
This standard establishes the marking requirements for identification and certification of miniature and instrument type annular ball bearings of domestic manufacture.
MIL-STD-206 - Friction Torque Testing For Bearings, Ball, Annular (Instrument Type)
This standard contains requirements for the friction torque testing of instrument type, annular ball bearings.
MIL-STD-2225 - Vibration And Noise Testing For Instrument Bearings
This standard prescribes a set of common warfighting symbols along with basic application and display rules for Department of Defense (DOD) Command, Control, Communications, Computer, and Intelligence (C4I) system operations, system development and training.
MS134351THRUMS134400 - Ball - Corrosion Resistant Steel, Precision Grade
MS15023 - Bearing, Roller, Cylindrical (For Metal Furniture)
MS150451THRUMS150500 - ( Images) Ball - Steel, Grade 1 (Asg) (Use Ms19059)
MS17102 - ( Images) Bearing, Ball, Thrust, Metric, Self-Aligning
MS17103 - ( Images) Bearing, Roller, Thrust, Ground, Single Direction, Inch Size, Flat Race Surface, Rigid Or Flat Seat Type , With Retainer (S/S By A-A-52414)
MS17107 - ( Images) Bearing, Ball, Annular, Primarily For Aircraft Motor-Generators, Type I (S/S By Sae-As17107)
MS17108 - ( Images) Bearing, Ball, Annular, Primarily For Aircraft Generators, Type Ii (S/S By Sae-As17108)
MS17130 - ( Images) Ring, Bearing, Inner: For Needle Roller Bearing With Drawn Outer Ring (S/S By Astm-F2163)
MS17131 - ( Images) Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open And Closed End, Standard Type (S/S By Astm-F2162)
MS17132 - Bearing, Roller, Needle, Thick Outer Race, Without Inner Race (Use Ms 51961)
MS17133 - ( Images) Bearing, Roller, Self-Aligning, Double Row
MS17136 - Race, Bearing, Inner-Carbon Steel, Needle Roller Bearing
MS17161 - ( Images) Bearing, Ball, Thrust: Inch And Metric Sizes, Grooved Race Surface Rigid Or Flat Seat Type (S/S By A-A-52491)
MS17162 - ( Images) Bearing, Ball, Thrust, Inch Size, Single Direction, Flat Race Surface, Staggered Ball Type
MS17169 - ( Images) Bearing, Roller, Thrust, Two Channeled Race Surface, Rigid Or Flat Seat Type (S/S By Astm-F2590)
MS19059 - ( Images) Balls, Bearing, Chrome Alloy Steel (See Notice 3 For Replacement Information)
MS19060 - ( Images) Balls, Bearing, Corrosion Resistant Steel (See Notice 3 For Replacement Information)
MS19061 - ( Images) Balls, Bearing, Carbon Steel (See Notice 3 For Replacement Information)
MS19062 - ( Images) Balls, Bearing, Non-Ferrous, Brass (See Notice 3 For Replacement Information)
MS19063 - ( Images) Balls, Bearing, Bronze (See Notice 3 For Replacement Information)
MS19064 - ( Images) Balls, Bearing, Nickel-Copper Alloy (K-Monel)(See Notice 3 For Replacement Information)
MS19065 - ( Images) Roller, Bearing, Ferrous, Solid, Spherical End (S/S By Astm-F2443)
MS19073 - ( Images) Bearing, Roller, Cylindrical, Single Row Of Rollers, Two Roller Retaining Ribs On Inner Ring, Two Roller Retaining Snap Rings On Outer Ring, Non-Locating
MS19074 - ( Images) Bearing, Roller, Cylindrical, Single Row Of Rollers, Tow Roller Retaining Ribs On Inner Ring, Cylindrical Outer Ring, Non-Locating
MS19075 - ( Images) Bearing, Roller, Cylindrical, Single Row Of Rollers, Cylindrical Inner Ring, Two Roller Retaining Ribs On Outer Ring, One Direction Locating
MS19076 - ( Images) Bearing, Roller, Cylindrical, Single Row Of Rollers, Cylindrical Inner Ring, Two Roller Retaining Ribs On Outer Ring, Non-Locating
MS19077 - ( Images) Bearing, Roller, Cylindrical, Single Row Of Rollers, Two Roller Retaining Ribs On Inner Ring, One Roller Retaining Rib On Outer Ring, One Direction Locating
MS19078 - ( Images) Bearing, Roller, Cylindrical, Single Row Of Rollers, One Roller Retaining Rib On Inner Ring, Two Roller Retaining Ribs On Outer Ring, One Direction Locating
MS19079 - ( Images) Bearing, Roller, Cylindrical, Single Row Of Rollers, Two Roller Retaining Ribs On Inner Ring, Two Roller Retaining Ribs On Outer Ring, Two Direction Locating
MS19081 - ( Images) Bearing, Roller, Tapered Single Row Of Rollers, Normal Angle
MS19082 - ( Images) Bearing, Roller, Tapered, Single Row Ofrollers, Normal Angle, Llanged Cup, Type 755 (Tsf)
MS19083 - ( Images) Bearing, Roller, Tapered, Single Row Ofrollers, Steep Angle, Type 753 (Tss)
MS19084 - ( Images) Bearing, Roller, Tapered, Single Row Ofrollers, Steep Angle, Flanged Cup, Type 759 (Tssf)
MS19085 - ( Images) Bearing, Roller, Tapered, Two Rows Of Rollers, Type 757 (Tdi) & 770 (Tdis)
MS19086 - ( Images) Bearing, Roller, Tapered, Double Row Of Rollers, Normal Angle, Two Single Cones, One Double Cup, Adjustable, Type 761 (Tdo)
MS19087 - ( Images) Bearing Roller, Tapered Double Row Of Rollers, Steep Angle, Two Single Cones, One Double Cup, Adjustable, Type 763 (Tdos)
MS19088 - ( Images) Bearing, Roller, Tapered, Double Row Of Rollers, Normal Angle, Two Single Cones, One Double Cup, Non Adjustable, Type 764 (Tna)
MS19089 - ( Images) Bearing, Roller, Tapered, Double Row Of Rollers, Steep Angle, Two Single Cones, One Double Cup, Non Adjustable, Type 767 (Tna)
MS20200 - Bearing, Ball, Airframe, Anti-Friction Heavy Duty (Use Ms27640)
MS20201 - Bearing, Ball, Airframe, Anti-Friction, Extra Light Duty (Use Ms 27641)
MS20202 - Bearing, Ball, Airframe, Anti-Friction, Extra Light Duty (Use Ms 27642)
MS20206 - Bearing, Ball, Airframe, Anti-Friction, Self-Aligning, Heavy Duty (Use Ms 27643)
MS20207 - Bearing, Ball, Airframe, Anti-Friction, Double Row, Heavy Duty (Use Ms27644)
MS20218 - ( Images) Bearing, Ball, Anti-Friction, Airframe (S/S By Sae-As20218)
MS21150 - ( Images) Bearing, Ball, Rod End, Double Row, Precision, Solid Shank, Self-Aligning, Airframe, Type I, -65 Deg. To 350 Deg. F (S/S By Sae-As21150)
MS21151 - ( Images) Bearing, Ball, Rod End, Double Row, Precision, External Thread, Self-Aligning, Airframe, Type Ii, -65 Deg. To 300 Deg. F (S/S By Sae-As21151)
MS21152 - ( Images) Bearing, Ball, Rod End, Double Row, Precision, Hollow Shank, Self-Aligning, Airframe, Type Iii, -65 Deg. To 300 Deg. F (S/S By Sae-As21152)
MS21153 - ( Images) Bearing, Ball, Rod End, Double Row, Precision, Internal Thread, Self-Aligning, Airframe, Type Iv, -65 Deg. F To 300 Deg. F (S/S By Sae-As21153)
MS21220 - ( Images) Bearing, Roller, Rod End, Internal Thread, Self-Aligning, Anti-Friction, Airframe, Heavy Duty, Type Ii, -67 Deg. To 350 Deg. F, Sealed (S/S By Sae-As21220)
MS21221 - ( Images) Bearing, Roller, Rod End, External Thread, Self-Aligning, Anti-Friction, Airframe, Heavy Duty, Type I, -67 Deg. To 350 Deg. F, Sealed (S/S By Sae-As21221)
MS21223 - ( Images) Bearing, Roller, Rod End, External Thread, Self-Aligning, Anti-Friction, Airframe, Heavy Duty, Type I, -67 Deg. To 350 Deg. F, Sealed (S/S By Sae-As21223)
MS21428 - ( Images) Bearing, Ball, Airframe, Anti-Friction, Extra Light Duty, Precision (S/S By Sae-As21428)
MS21429 - ( Images) Bearing, Roller, Antifriction, Rod End, External Thread, Self-Aligning, Air Frame, -67 Degrees F To 350 Degrees F, Type 1, Heavy Duty, Sealed (S/S By Sae-As21429)
MS21431 - ( Images) Bearing, Roller, Self-Aligning Single Row Anti-Friction, Sealed -65 To 350 F, Type I (S/S By Sae-As21431)
MS21432 - ( Images) Bearing, Roller, Needle, Track Roller, Integral Stud, Type Vii, Antifriction, Inch (S/S By Sae-As21432)
MS21438 - ( Images) Bearing, Roller, Needle, Single Row, Heavy Duty, Track Roller, Sealed, Type V, Antifriction, Inch (S/S By Sae-As21438)
MS21439 - ( Images) Bearing, Roller, Needle, Double Row, Heavy Duty, Track Roller, Sealed, Type Vi, Inch (S/S By Sae-As21439)
MS21440 - ( Images) Bearing, Roller, Needle, Track Roller, Integral Stud, Sealed, Type Viii, Antifriction, Inch (S/S By Sae-As21440)
MS21442 - ( Images) Bearing, Roller, Needle, Track Roller, Sealed, Type X, Antifriction, Inch (S/S By Sae-As21442)
MS21443 - ( Images) Bearing, Ball, Airframe, Anti-Friction, Pulley (S/S By Sae-As21443)
MS21446 - ( Images) Bearing, Roller, Self-Aligning Single Row, Barrel Roller, Torque Tube, Airframe, Antifriction, Sealed Type V (S/S By Sae-As21446)
MS21447 - ( Images) Bearing, Roller, Needle, Track Roller Crown Radiused O.D. Integral Stud, Type Vii Antifriction, Inch (S/S By Sae-As21447)
MS24461 - ( Images) Bearing Roller, Needle, Single Row, Heavy Duty, Type I, Antifriction, Inch (S/S By Sae-As24461)
MS24462 - ( Images) Bearing, Roller, Needle-Single Row, Thin Shell, Type Ii, Antifriction (S/S By Sae-As24462)
MS24463 - ( Images) Bearing, Roller, Needle-Single Row, Heavy Duty, Self-Aligning, Type Iii, Antifriction, Inch (S/S By Sae-As24463)
MS24464 - ( Images) Bearing, Roller, Needle-Double Row, Heavy Duty, Self-Aligning, Type Iv, Antifriction, Inch (S/S By Sae-As24464)
MS24465 - ( Images) Bearing, Roller, Needle-Single Row, Heavy Duty, Track Roller, Type V, Antifriction, Inch (Use Ms 21438)
MS24466 - ( Images) Bearing, Roller, Needle-Double Row, Heavy Duty, Track Roller, Type Vi Antifriction, Inch (Use Ms21439)
MS26508 - Bearing, Ball, Rod End, Solid Shank, Self-Aligning, Anti-Friction, Airframe (Use Ms-21150)
MS26559 - Bearing, Ball-Annular, Antifriction, Engine Accessories, Aircraft, Type I (Land )Inner Or Outer( Controlled Separator)
MS26560 - Bearing, Ball-Annular Antifriction, Engine Accessories, Aircraft, Type 11 (Ball Controlled Separator)
MS27261 - Bearing, Ball, Airframe, Anti-Friction, Self-Aligning, Light And Heavy Duty (Use Ms 27645)
MS27640 - ( Images) Bearing, Ball, Airframe, Anti-Friction, Heavy Duty (S/S By Sae-As27640)
MS27641 - ( Images) Bearing, Ball, Airframe, Anti-Friction, Intermediate Duty (S/S By Sae-As27641)
MS27642 - ( Images) Bearing, Ball, Airframe, Extra Light Duty (S/S By Sae-As27642)
MS27643 - ( Images) Bearing, Ball, Airframe, Anti-Friction, Self-Aligning, Double Row, Heavy Duty (S/S By Sae-As27643)
MS27644 - ( Images) Bearing, Ball, Airframe, Anti-Friction, Double Row, Heavy Duty (S/S By Sae-As27644)
MS27645 - ( Images) Bearing, Ball, Airframe, Anti-Friction, Self-Aligning Light And Heavy Duty (S/S By Sae-As27645)
MS27646 - ( Images) Bearing, Ball, Airframe, Anti-Friction, Extra Light Duty (S/S By Sae-As27646)
MS27647 - ( Images) Bearing, Ball, Airframe, Anti-Friction, Extra Wide, Double Row, Intermediate Duty (S/S By Sae-As27647)
MS27648 - ( Images) Bearing, Ball, Airframe, Anti-Friction, External Self Aligning, Extra Light Duty (S/S By Sae-As27648)
MS27649 - ( Images) Bearing, Ball, Airframe, Antifriction, Intermediate Duty (S/S By Sae-As27649)
MS28912 - ( Images) Bearing, Roller, Self-Aligning, Single Row Airframe, Anti-Friction, Sealed, Type 1 (S/S By Sae-As28912)
MS28913 - ( Images) Bearing, Roller, Self-Aligning, Double Row Airframe, Anti-Friction, Sealed, Type Ii (S/S By Sae-As28913)
MS28914 - ( Images) Bearing, Roller, Self-Aligning, Double Row Airframe, Anti-Friction, Sealed, Type Iii (S/S By Sae-As28914)
MS28915 - ( Images) Bearing, Roller, Self-Aligning, Double Row Torque Tube, Airframe, Anti-Friction, Sealed, Type Iv (S/S By Sae-As28915)
MS3224 - ( Images) Balls, Bearing, Aircraft Quality Steel (See Notice 3 For Replacement Information)
MS3226 - ( Images) Balls, Bearing, Grade 10, Aircraft Quality Steel (See Notice 3 For Replacement Information)
MS500072 - ( Images) Bearing, Roller, Needle: Assembly (Thick Outer Race) (S/S By Astm-F2430)
MS500087 - ( Images) Bearing, Roller, Needle. Assembly (Thin Outer Race)
MS51961 - ( Images) Bearing, Roller, Needle: Thick Outer Ring W/Rollers And Cage (S/S By Astm-F2246)
MS51962 - ( Images) Ring, Bearing, Inner: For Needle Roller Bearing With Thick Outer Ring (S/S By Astm-F2431)
MS52141 - ( Images) Bearing, Roller, Needle: Drawn Outer Ring, Caged, Without Inner Ring Open And Closed End, Standard Type
MS52142 - ( Images) Bearing, Roller, Needle, Drawn Outer Ring, Full Complement, Without Inner Ring, Open End, Extra Precision Type
MS52143 - ( Images) Bearing, Roller, Needle: Thick Outer Ring With Rollers, Cage And Seals
MS9461 - ( Images) Ball, Bearing - Precision Grade, Ams 7445 (S/S By Ms19060)
NAS562 - Cam Follower, Needle Bearing, High Strength Stud -
NAS659 - Bearing Rod End, External Thread, Self Aligning, Anti-Friction
NAS661 - Bearing, Ball And Roller, Rod End, Anti Friction, Airframe
QPL-16129-1 - Bearings, Ball (For Torpedo Gyroscopes)
QPL-17931 - Bearing, Ball, Annular, For Quiet Operation
QPL-22227-6 - Bearing, Ball, Annular, Generator And Motor-Generator
QPL-23063 - Bearing, Ball, Annular, Instrument Precision
QPL-3990-11 - Bearings, Roller, Needle, Airframe, Antifriction, Inch (S/S By Qpl-Sae-As3990)
QPL-6039-5 - Bearings, Ball, Rod End, Double Row, Self-Aligning (S/S By Qpl-As6039)
QPL-7949-24 - Bearings, Ball, Airframe, Antifriction (S/S By Qpl-Sae-As7949)
QPL-8914-9 - Bearing, Roller, Self-Aligning, Airframe, Antifriction (S/S By Qpl-Sae-As8914)
QPL-8952-7 - Bearing, Roller, Rod End, Antifriction Self-Aligning (S/S By Qpl-Sae-As8952)
QPL-FF-B-171-53 - Bearings, Ball Annular, (General Purpose) Metric
QPL-FF-B-185-39 - Bearings, Roller, Cylindrical, And Bearings, Roller, Self-Aligning
QPL-FF-B-187-32 - Bearing, Roller, Tapered
For Parts Inquires submit RFQ to Parts Hangar, Inc.
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business